SHOES PROTECTIVE
The material used to make the upper of the shoe can be different, depending on the customer's requirements and technical parameters for the product, scope and degree of protection: multilayer film, cotton, PVC coated, plastic compound. Sole polymer, anti-slip. The color scheme is varied.
Shoes are light and comfortable to wear, put on, made in compliance with modern design.
Boots for nuclear worker white with textile top.
Textile upper made from 3-layer laminated material.
For shaping, a non-woven fabric is duplicated between the main fabric and the lining to provide hydrophobic and antibacterial shoe parameters. The sole is polyurethane single-layer, wear-resistant. The textile fastener is located at an angle. The insole stitched with textile top.
Shoe covers with polyurethane coating
They protect the feet of a person at a height of 200 mm during a short stay in areas where work is carried out with radioactive chemically toxic substances. The sole must be rigid with anti-slip protection. Are firmly fixed on the feet with an elastic band. Seams are stitched and sealed with polyurethane mortar.
Plastic compound shoes
Designed to protect the lower extremities and footwear during repair, installation, decontamination and other long-term work with a high level of pollution.
Shoe covers with polymer sole made of polymer material
They are worn on the main safety shoes to protect against radioactive contamination. Product height 21 cm. Polymer sole, corrugated, anti-slip. A zipper with a protective valve, from leakage it is tightened with a braid with a lock on top.